Stainless steel “J” section trim is used to finish the edge of stainless steel sheet.
Please note grey image is a 3D render, product is stainless steel. This stainless steel top and bottom ‘J’ section fits up to 2mm thickness.
Available in 2.5mt lengths.
Sanisteel sheeting is the perfect stainless steel wall cladding for commercial kitchen cooklines. Hygienic and robust, our hard wearing cladding sheets are supported by stainless steel profile joining and finishing trims.
Held in stock for next working day delivery, combined with our PVC hygienic wall cladding, we provide a full solution for any food service establishment and commercial kitchen.
*Please note due to a high risk of damage this items requires a lay flat double pallet delivery and therefore a minimum charge of £80 is applied for carriage at checkout*
Available in 2.5m x 1.25mt (cutting service available).
The Sani-Life range offers designers a choice of gloss bold colours to enhance any environment whilst still providing an easy to clean surface, sheets can be joined using trims or welded. We can also offer a cut to size service please call our office for details. Sheets are available in 2.5mt & 3.05mt lengths.
A two-part H section joining trim is used to join Saniclad sheets together, it has an antimicrobial gasket seal on the top section which effectively eliminates 99.9% of bacteria’s.
A two-part H section allows the installer to set out the expansion gap.
Available in 2.44m/3.05m Lengths
The 100mm two part coving is typically used between the ceiling and wall. The aluminium backer is also used to hold composite panels in place before clipping PVC coved front into position. Internal and external corners are also available in our online shop
A “H” joiner is used to join a 10mm Saniboard or to extend a ceiling, for example if your ceiling was 10mt x 10mt in length you would have a “H” right the way across the room at 5mt and then continue your installation with another 5mt row of ceiling planks.
Hygienic Rivers are used to assist in the fixing of hygienic plastic wall cladding to walls. We commonly use them in areas where usage is a little heavier than a commercial kitchen usually butchers shops & abattoirs
Used as an Internal or External PVC corner, this is a 25mm x 25mm universal angle.
Height 2.44mt, to install apply a single bead of SaniBond 300 along the full length and push into place.
The SaniLife Internal Small cove corner is used to neatly finish inside corners; one side has a groove that slides onto the sheet the other side of the angle covers the sheet.
Available in 2.44m/3.05m Lengths.
A tough, durable stainless steel external corner angle for use in high traffic areas – perfect to accompany our stainless steel wall cladding, this protects corners from impact that would otherwise damage sheets and require a replacement. Size: 50mm x 50mm x 2500mm
The SaniLife “H” section joining strip is used to neatly join sheets together allowing for expansion.
Available in 2.44mt/3.05m Lengths. Please note image is a 3D render for profile illustration purposes and matched to cladding, for colour sheet samples please request a sample pack.
Saniclad preformed 150mm x 150mm Satin White corners available in 2.44mt and 3.05mt lengths. If you want a professional finish use our preformed external corner with 2 x H section joiners.
The SaniLife “J” section edging strip is used to neatly finish coloured sheet edges.
Available in 2.44m/3.05m Lengths. Please note image is a 3D render for profile illustration purposes and matched to cladding, for colour sheet samples please request a sample pack.
A versatile white 10mm hygienic board that can be used to line poor quality walls, reduce the need for plasterboard or hide services. The material can be easily machined and cut with a jigsaw. The gallery photos show the material lining mobile changing room walls. The boards are installed directly on to a metal grid specifically designed for us to bond to. This board is class 0-1 fire rated and resistant to moisture ingress.
Available in 2500mm x 1000mm and 3000mm x 1250mm sizes.
This material can be cut to size, just purchase our material cutting and advise specific sizes in the notes on checkout.
We also can have this material made in specific colours subject to a minimum order quantity.
The SaniLife matching colour F profile angle is used to cover external corners; one side has a groove that slides onto the sheet the other side of the angle covers the sheet.
Available in 2.44m/3.05m Lengths.
The 100mm(H) x 4mt(L) double skin skirting is versatile with a clever hidden flap which allows the skirting to be mechanically fixed to any substrate. Internal and external corners are available to match.